curve
Bharti Technologies, Abu Dhabi-114299
whatsapp
chat
solar pv panels

265Wp ANTI-DUST HIGH EFFICIENCY
MULTICRYSTALLINE PHOTOVOLTAIC MODULE

Highlights of Kyocera photovoltaic modules
Kyocera’s advanced cell processing technology and automated production facilities produce highly efficient multi crystalline photovoltaic modules.
The conversion efficiency of the Kyocera solar cell is over 18.4%.
These cells are encapsulated between a tempered glass cover and a EVA pottant with back sheet to provide efficient protection from severe environmental conditions.
The entire laminate is installed an anodized aluminum frame to provide structural strength and ease of installation.
Equipped with plug in connectors.

Specification

  • Module Efficiency 16.1% : KK265P-3CD3CG

Electrical Performance under Standard Test Conditions (STC*)

  • Maximum Power (Pmax) : 265 W (+5%,-3%)
  • Maximum Power Voltage (Vmpp) : 31.0V
  • Maximum Power Current (Impp) : 8.55 A
  • Open Circuit Voltage(Voc) : 38.3 V
  • Short Circuit Current (Isc) : 9.26 A
  • Max System Voltage : 1000 V
  • Temperature Coefficient of Voc : -1.36 x 101 V/°C
  • Temperature Coefficient of Isc : 5.43 x 103 A/°C

*STC: Irradiance 1000W/m², AM1.5 spectrum, module temperature 25°C

Electrical Performance at 800W/m², NOCT*, AM1.5

  • Maximum Power (Pmax) : 191 W
  • Maximum Power Voltage : 27.9 V
  • Maximum Power Current : 6.85 A
  • Open Circuit Voltage (Voc) : 35.1 V
  • Short Circuit Current (Isc) : 7.49 A

*NOCT (Nominal Operating Cell Temperature): 45°C

Cells

  • Number per Module : 60
  • Cell Technology : Multi crystalline

Module Characteristics

  • Length x Width x Depth without Box : 1662 x 990 x 46 mm
  • Weight : 19.0 kg
  • Cable : (+)1200/ (-) 1200 mm

Junction Box Characteristics

  • Length x Width x Depth : 110 x 109 x 17 (mm)
  • IP Code : IP 67

Others

  • Reduction* : 3.3%
  • Limiting Reverse Current : 15 A
  • Mechanical load (to IEC61215 ed.2) : Pressure 2400 Pa
solar panels

HIGH EFFICIENCY MULTICRYSTALLINE
PHOTOVOLTAIC MODULE
IEC61215Ed.2
EN61730
This module is manufactured in IS09001 certified factories.
Registered No.: JM10036 (Japan), CN07/00321 (China), 01 100 528 050018
(Czech Republic), FM26856 (Mexico)
TUVdotCOM Internet platform for tested quality and service ID 0000023299.

Specification

  • Module Efficiency 16.1% : KS242P-3CF3CE

Electrical Performance under Standard Test Conditions (STC*)

  • Maximum Power (Pmax) : 242 w
  • Maximum Power Voltage (Vmpp) : 29.8V
  • Maximum Power Current (Impp) : 8.13 A
  • Open Circuit Voltage(Voc) : 36.9 V
  • Short Circuit Current (Isc) : 8.80 A
  • Max System Voltage : 600 V

*STC: Irradiance 1000W/m2, AM1.5 spectrum, module temperature 25°C

Cells

  • Number per Module : 60
  • Cell Technology : Multicrystalline

Module Characteristics

  • Length x Width x Depth without Box : 1662 x 990 x 46 mm
  • Weight : 20.0 kg
  • Cable : (+)720/(-) 2205 mm

Others

  • Limiting Reverse Current : 15 A
  • Mechanical load : Pressure 2400 Pa